Hi guys
Have had my machine about 2 years now used intermittently but at least 3 times weekly.
Have just pulled the old group gaskets out as they were thinned out and leaky.
The machine is about 50kg and is a 1990s ECM Rafaello A2 (not megaline)
One of the things i haven't worked out is how to get descaler into a plumbed in machine - there is a permanent filter between the mains and the machine plumbing which can be released from the plumbing e.g.
MAINS-------XFILTERX----- MACHINE with the X being where the nut can be unscrewed and I was wondering aside from stripping the machine down or inserting another T pipe into the plumbing how to get the descaler in.
I have also been advised to somehow override the overfill cutout (otherwise only half a boiler gets descaled) but I don't know how to do this and the machine is too heavy to tip on its side.
(Just out of interest how do you then know when the boiler is full to the brim?)
Many thanks
Jamie