Page 1 of 1
Dismatling Zassenhaus
Posted:
Mon Nov 17, 2008 11:16 am
by inserttitle
I have a fairly new Zassenhaus Santiago grinder. I want to dismantle it fully as it was damaged when I spilt a bottle of vinegar in the draw (don't ask how!).
I've taken out the four screws and removed the entire grinder assembly. I can remove the but from above the handle, but I cannot remove the handle etc.
I can't see anywhere to get a grip on the spindle so I can unscrew the handle.
Any idea how to do this?
RE: Dismatling Zassenhaus
Posted:
Mon Nov 17, 2008 6:45 pm
by CakeBoy
Welcome to TMC 'insert'
. Hopefully someone who can help with your problem will be along soon. Good luck.
RE: Dismatling Zassenhaus
Posted:
Tue Nov 18, 2008 10:58 am
by fred25
Can't help you either, but a very warm welcome nonetheless!
I'll leave someone else to ask the ritual question....
RE: Dismatling Zassenhaus
Posted:
Tue Nov 18, 2008 12:36 pm
by lukas
Welcome to the madhouse! When I stripped a hand grinder, there was nothing to hold on either - I very carefully blocked the burrs with something (can't remember what, maybe a screwdriver?) and unscrewed the thing.
RE: Dismatling Zassenhaus
Posted:
Tue Nov 18, 2008 2:40 pm
by inserttitle
Thanks, Lukas, when you say "blocked the burrs" do you mean you put something between them? I'll carry on trying...
RE: Dismatling Zassenhaus
Posted:
Tue Nov 18, 2008 9:40 pm
by inserttitle
Done it. FYI, in the end I put a pair of pliers through the bean shoot door, grabbed the spindle and turned the handle. Came off fairly easily in the end, no visible damage.
Thanks for the help.