Hi
yeah I was actually thinking whether to add the holes or not because without them you can easily use the funnel on any machine. I might add the main hole for the burr chamber, but those two smaller ones for bolts are probably going to be left out (or I might do them, it's pretty much your call).
This is my CAD drawing for the funnel:
It's not final as I'm waiting for Cakey to measure the diameter of the doser and I will use the same diameter on the funnel (i'm guessing it's around 140mm).
Today one of the metal spinner contacted me and said that I can opt to use brass for the funnel and have it chromed later. What do you say to something like that?
We will have to take into consideration the costs of sending the steel base from the turner to the metal spinner and it will probably cost around 6-7 pounds because the damn base weights 20kg:O
Maybe we should make this topic a sticky? I mean Steve can make it a sticky I haven't got the power to do that:)
Cheers,
dsc.
EDIT: Ordo you have to get the bottom plate off and there's another screw holding the chute from the inside:)
As for the lid, if the diameter is going to be the same as for the doser we will be able to use the top from the doser as well. The question is where the hell can we get the doser tops from?:)